• Apc 5000 Serial Connection
• Apc Smart Ups 1500 Serial Connection

1. APC’s next-generation Connected Smart-UPS enables you to monitor your power infrastructure online, anytime - anywhere - from our secure SmartConnect web portal. The Connected Smart-UPS with a dedicated SmartConnect™ Ethernet Port makes set up easy.
2. Jan 27, 2010  Pinout of APC Smart UPS cable and layout of 9 pin D-SUB male connector and 9 pin D-SUB female connectorAPC Part# 940-0024C, # 940-0024B, # 940-0024D or 940-1524(black cable). Compatible with most APC UPSs that have a DB9 serial port. Should work with APC PowerChute or Apcupsd(UPS Server for Linux).

Apc 5000 Serial Connection

Feb 11, 2011  I know it sounds simple, and it sounds like ANYONE should be able to do this but I cannot. I have attempted to connect via serial cable (the APC serial cable none-the-less that I had to purchase because you can ONLY use APC serial cables.) Once connected with the serial cable, I opened hyperterminal with the suggested settings and no luck. Apply the port settings to establish the connection. Press 3-5 times to display the username prompt. Use the default username and password of 'apc' You are now in the control console. Choose 'Network' Choose 'TCP/IP' Choose 'Boot mode' Change Boot mode to 'Manual' Set the system IP, subnet mask, and default gateway. Accept changes.

Apc Smart Ups 1500 Serial Connection

Is this the NIC card you have installed in your UPS? /windows-disk-image-usb.html.

If so, have you tried using the 'Network Management Device IP Configuration WizardAti radeon drivers windows 7 32 bit. ' to configure it? If you don't have that application, you can download it from here:

Connect your UPS to the same network as the computer you are using to configure it. You can install the configuration wizard and follow the step-by-step instructions that you can find on that same page. I haven't done it in a while but from what I remeber it is very straight forward with that software.